SAGAR ENGINEERING WORKS UNIT NO.1
(Impex Model)
4 ft. to 40 ft. Stroke PLGM Cum Planer
SPECIFICATONS | |||||||
|
|||||||
Width between columns | 4ft | 5ft | 6ft | 7ft | 8ft | ||
Capacity (in mm) | |||||||
Width between columns | 1220 | 1524 | 1828 | 2133 | 2430 | ||
Height under Cross Rail | 1220 | 1524 | 1828 | 1828 | 1828 | ||
TABLE: | |||||||
|
|||||||
No. of T-Slots | 5 | 6 | 6 | 7 | 7 | ||
Width of T-Slots | 19 | 19 | 19 | 19 | 19 | ||
Distance between T-Slots | 127 | 148 | 190 | 190 | 190 | ||
MILLING HEADS: | |||||||
|
|||||||
Horizontal Traverse of one Milling | |||||||
Head on Cross Rail | 1200 | 1500 | 1800 | 2100 | 2400 | ||
Max Swivef of Milling Head to either side | ?50? | ?50? | ?50? | ?50? | ?50? | ||
Cross rail | |||||||
Vertical Traverse of cross rail mm (elevating) | 1200 | 1500 | 1800 | 1850 | 1850 | ||
Elevating Traverse of side Milling head | 850 | 1150 | 1400 | 1450 | 1450 | ||
MILLING HEADS (SPECIFICATIONS) | |||
MILLING HEADS | GENERAL DUTY | HEAVY DUTY | EXTRA HEAVY DUTY |
No of Speeds | 6 | 6 | 4 |
Range of Speeds In RPM | 100 To 570 RPM. | 60 To 500 RPM | 50 To 300 RPM |
Motor 3 Phase 440 Volts | 5 H.P. | 7.5 H.P. | 10 H.P. |
Spindle Dia at Nose. | 120mm. | 120 mm. | 140 mm. |
Vertical traverse of Quill. | 100mm. | 100 mm. | 140 mm. |
Vertical traverse operation | Manual | Manual | Manual |
Micro feed Manual | 0.05 mm. | 0.05 mm | 0.05 mm |
Feed of Table for Milling | 20 mm to 300 mm | 20 mm to 300 mm | 20 mm to 300 mm |
Cutter Dia | 80 mm to 100 mm | 120 mm to 150 mm | 200 mm to 300 mm |
Spindle Nose Taper | ISO-50 | ISO-50 | ISO-50 |
Holding of Cutter | By draw bolt | Either by draw bolts/bar or bolts on spindle noises | |
*We reserve the right to change design, colour or specification without notice * |